Mastervolt Powerbook 2023 EN

CZone Switch Control Interface (SCI) Single switch position can control multiple OI channels. Attaches to switch panels via custom SCI cable. Multiple SCI switches can control single OI channel. Output for backlighting of switch labels (dimmable). Outputs systems on and function/fault codes to systems on LED of switches (dimmable). Dimensions, hxwxd: 100 x 156 x 42 mm / 3.9 x 6.1 x 1.7 inch IPx5 water ingress protection. Programmable switch types. 8 inputs per module (16 individual controls). Sequential button press functionality. Choice of push button or rocker style switch. CZone Contact 6 Interface Entry level digital switching module for 12 V marine and RV applications. Stand alone or networked with other CZone products. Compatible with CZone integrated Multifunction Displays (MFD’s). Six independent dry contact relays allow positive, negative and reversing motor control. Dimensions, hxwxd: 100 x 156 x 42 mm / 3.9 x 6.1 x 1.7 inch IPx5 water ingress protection. Conform NMEA 2000. Proven CZone technology. Internal auto-resetting fuses. Electronic relay bypass switch. Status LEDs/fault codes for all channels. CZone Signal Interface (SI) Accepts inputs from traditional switch types being used to control outputs. Accepts inputs from switches to trigger alarm i.e. high water float switch. Accepts inputs from industry-standard tank senders (0-5V, 10-180 Ohm, 240-33 Ohm). Accepts inputs from general voltaic or resistive signals, can be used for controlling outputs or to display a physical position, e.g. show a hatch is partially open. LED status indicators for each input. Dimensions, hxwxd: 100 x 156 x 42 mm / 3.9 x 6.1 x 1.7 inch IPx5 water ingress protection. Outputs standard NMEA 2000 sentences. Resistive input range 0–1000 Ohms. Voltage sensing input range 0–34 V DC. Product code 80-911-0011-00 Switch Control Interface with seal Product code 80-911-0140-00 Delivered with gland and plug pack Product code 80-911-0013-00 Signal Interface with seal and connector Product code 80-911-0012-00 Switch Control Interface only Product code 80-911-0014-00 Signal Interface only CZone ® Network Components CZone Switch Control Interface (SCI) CZone Signal Interface (SI) NOTE : High and low alarm levels can be set for all inputs. PRODUCTS | MANAGE & MONITOR CZone Contact 6 Interface The Signal Interface connects the CZone system to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input. The Switch Control Interface provides an interface between the CZone network and the traditional mechanical switches with which manufacturers and users are familiar. The SCI simplifies your wiring, supports your existing choice of switches, protects against failures and allows for more installation options. The CZone Contact 6 is an entry level digital switching module. It offers six independent channels of positively or negatively switched output channels and is ideal to standalone on smaller marine or recreational vehicle applications, or as part of a larger network. The Contact 6 can be networked via NMEA 2000 and controlled using a CZone Touch display, wirelessly using a CZone Wireless Interface, networked Multifunction Display or digital push or toggle switch. ACCESSORIES Cable gland for SCI, silicone 80-911-0035-00 Hole plugs for SCI cable glands, 5 mm 80-911-0017-00 ACCESSORIES Cable gland for SI, silicone 80-911-0036-00 Terminal block for SI, 8-way 80-911-0043-00 Hole plugs for SI cable glands, 3.2 mm 80-911-0016-00 FOR MANUALS, CERTIFICATES, DRAWINGS, PRODUCT IMAGES - SEE DOWNLOADS AT MASTERVOLT.COM/CZONE 106