Mastervolt Powerbook 2023 EN

AC Master AC Master AC Master AC Master 24/300 24/500 24/700 24/1000 Product code 28020302 28020502 28020700 28021000 With UK plug n.a. n.a. 28220700 28221000 With NZ/AU plug n.a. n.a. 28420700 28421000 GENERAL SPECIFICATIONS Output voltage 230 V – 50 Hz (± 0,1.%) 230 V – 50 Hz (± 0,1.%) 200/220/230/240 V 50/60 Hz (selectable) 200/220/230/240 V 50/60 Hz (selectable) Output waveform true sine true sine true sine true sine Nominal battery voltage 24 V 24 V 24 V 24 V Recommended battery capacity ≥ 30 Ah ≥ 50 Ah ≥ 50 Ah ≥ 65 Ah Continuous power at 25 °C / 77 °F, cos phi 1 300 W 500 W 700 W 1000 W Continuous power at 40 °C / 104 °F, cos phi 1 250 W 400 W 700 W 1000 W Peak load 600 W 800 W < 810 W (1 min) < 1230 W (1 s) < 1150 W (1 min) < 1750 W (1 s) AC connection universal universal plug connection EU (Schuko) or UK plug connection EU (Schuko) or UK Efficiency 91 % 91 % 93 % 94 % Parallel configuration n.a. n.a. n.a. n.a. 3-Phase configuration n.a. n.a. n.a. n.a. Display/read-out LED display LED display LED indication: battery voltage, load level, status Dimensions, hxwxd 210 x 130 x 60 mm 8.3 x 5.1 x 2.4 inch 210 x 130 x 60 mm 8.3 x 5.1 x 2.4 inch 200 x 330 x 83 mm 7.9 x 13 x 3.3 inch 200 x 372 x 83 mm 7.9 x 14.6 x 3.3 inch Weight 1.16 kg / 2.55 lb 1.22 kg / 2.69 lb 2.7 kg / 6 lb 3.3 kg / 7.3 lb Alarms 4 alarm modes 4 alarm modes potential free alarm contact Approvals CE, E-mark, ABYC A-31 CE, E-mark, ABYC A-31 CE, E-mark, RCM, ABYC A-31 CE, E-mark, RCM TECHNICAL SPECIFICATIONS Technology high frequency, input & output fully isolated Input current (nominal load) 11 A 19 A 35 A 50 A No-load power consumption (energy saving mode) 0.16 A – 4 W 0.16 A – 4 W < 0.06 A < 0.05 A Minimal DC fuse (slow blow) 40 A 40 A 50 A 63 A Minimal cable size 1.5 mtr DC cable delivered as standard 16 mm 2 16 mm 2 Harmonic distortion typical < 6 % < 6 % < 5 % < 5 % Cos phi all power factors allowed Transfer system n.a. n.a. n.a. n.a. Temperature range (ambient temp.) -20 °C to 60 °C, derating power > 40 °C / -4 °F to 140 °F, derating power > 104 °F Protection degree IP23, vertical wall mounting IP23, vertical wall mounting IP21, horizontal wall mounting Protections over-temperature, overload, short circuit, high/low battery voltage over-temperature, overload, short circuit, high/low voltage, reverse polarity (fuse) Cooling natural/forced natural/forced temperature and load controlled fan MasterBus compatible no no yes, using a MasterBus AC Master Interface Specifications AC Master sine wave inverters 24 V PRODUCTS | CHARGE & CONVERT ACCESSORIES AC Master Remote Control 70405080 n.a. n.a. option option On/off control for the AC Master sine wave inverter with a clear on/off indicator which indicates when the inverter is active. In addition, the AC Master Remote Control makes it possible to turn the inverter on or off automatically by means of a 12-volt input, for example when switching on the onboard AC power or while starting an engine. The AC Master Remote Control comes with 8 m (25 ft) cable. MasterBus AC Master Interface 77032700 n.a. n.a. option option The MasterBus AC Master Interface allows seamless integration of an AC Master inverter into every MasterBus network. By adding the AC Master Interface to your installation, you can now control your AC Master inverter via our MasterBus communication network. A communication cable is included in the delivery. 38